Von Arx AG

Gelterkinderstrasse 24

4450 Sissach

Switzerland

 

DTF 25 SH

Working width 250mm: With the DTF 25 SH the surface is carefully „grinded off“ instead of chipping it away. Thus the machine runs calmly and produces a smooth surface. The DTF 25 SH has a drum which is equipped with diamond blades. It removes the material very precise. For grooving or milling you can choose between two different diamond blades: one for rough and one for smooth surface preparation. For running the machine you must connect the water cooling system so the diamond blades do not overheat. The machine is available as a 11 kW electrical version with a hydraulic traction unit.
It is not allowed to run the side attachment unit at the same time as the main cylinder.


DTF 25
 Article no. 708697Type: DTF 25 SH with

hydraulic traction

Technical Data:
Weight:
Electrical power:
Wattage:

Working width:
Distance to wall:
Dimensions:

Standard cutters:




ca. 220 - 226 kg (484 - 497 lbs)
3x 400V / 50Hz
11 kW

250mm (10“)
105mm (4.2“)
1150 x 480 x 1150mm
(45 x 19 x 45“)
without drum
Drum is beeing cooled with water
DTF 25
 Article no. 707534Type: SF DTF 25

Side attachement unit

Technical Data:
Weight:
Working width:
Distance to wall:
Dimensions:



The SF DTF 25 attach-
Von Arx DTF 25 machine

for DTF 25 + DTF 25 SH


ca. 8.5 kg (33 lbs)
87mm (3.5“)
15mm (0.6“)
320 x 215 x 200mm
(13 x 8.5 x 8")
Drum is beeing cooled with water

ement unit, can be mounted on any
very easily in a couple of minutes
DTF 25
 Article no. 701235directional guide

The directional guide
to follow the given lines

is particularly designed to be able accurately.

back to last page
1 2 3 4 5 6